Posted on

Hendrick’s Gin Giveaway

Recently, being some several months ago or less, as “recently” tends to go for me, Hendrick’s Gin contacted me to participate in their “Curate a Box” contest give away.

Though I have been rather up to my neck in getting out the rewards for the Infernal Device Kickstarter (which when done I plan to celebrate by logging all the ins and outs of the experience into a seriously detailed tutorial), I really hate to pass up good opportunities for promotion, especially when it involves interesting new challenges.

So, in between bonding prints to wooden constructs, waiting for layers of decoupage glue to dry, refining screens for printing, and wrestling with packages, I’ve been hopping into the basement workshop and doing some work on this wooden box they sent me – the box and contents to be given away by Hendricks Gin when done, through their fascinating newsletter and blog at Unusual Times.

My plan, as with all things I do, is to make an heirloom quality and long-lasting piece, so I felt I should do a bit of added reinforcement to the original box with some fine bits of oak, birch, mahogany, maple, and/or cherry, which are the sorts of wood I prefer to make my constructs of and paint my paintings onto.

The wooden box, straight out of the package
The wooden box, straight out of the package

The very first step, of course, was to remove the box from the package. There was a wonderful promotional book from Hendrick’s Gin in there as well, but Insects and Angels Author and Editor Bethalynne Bajema so-loved the little book and all the artwork within, that well… she was still thumbing through the book, and I might have lost a finger if I tried to reclaim it. Anyway.. the box, above.

Basic Box opened
Basic Box opened

Another shot of the box, it’s insides just the perfect size for a number of unique 8.5×11 printings of some of my select artworks.

I plan to fill this box with:

1) At least 6 hand-signed fine art prints on a special paper and of a special size to make them one of a kind.
2) A Magickal Bag of Holding
3) A polar bear
4) A bunch of Arctic Salmon for the polar bear
5) Bethalynne says that Magickal Bags of Holding are not available anywhere around here, and are quite likely mythical.
6) An original painting, as the inside top of the box, which fits snugly but can be removed and framed.
7) Tacos! Everyone loves tacos!
8) Apparently the above is also a violation of postal code.
9) Some sort of sea monster… though a rather tiny one, made of clay and hand-painted.
10) I don’t know yet… it seems like a lot so far, so I’ll have to see what else the box can hold…. maybe some stickers and patches.

Stage One: Cut a piece of oak to serve as a sturdy top to the box.
Stage One: Cut a piece of oak to serve as a sturdy top to the box.

The first thing I did was to cut some pieces of oak – two for the insides of the box (one to reinforce the bottom, one to be painted and inserted into the box later), one to make for a hard and sturdy plate for top of the box.

Box Top
Box Top
Panel for Painting
Panel for Painting
panel for the bottom of box insert
panel for the bottom of box insert

Work Space: YeGads!! …

Ground Zero
Ground Zero - dust, wheels, pulleys, cogs, a half-repaired bandsaw, and more dust
Ground Zero 2
brass bits, metal fittings, brass switchplates, knobs, more pulleys...
Ground Zero 3
Ground Zero 3 - saved bits of cherry, walnut, heartwood pine, oak, and mahogany. I use every little bit of wood, down to tooth-pick-sized bits, for everything from furniture, boxes, painting, down to using the smallest bits for fine details and decorative touches.
Ground Zero 4
Ground Zero 4 - animatronic bat machine - in pieces and on hold for a little while more.

Above 4 photos: Ground Zero… I have been working from one thing into another for way too long. The workshop is piled in bits of brass and unsorted wood… and I am pretty sure there are some clamps and other important tools under there somewhere. I should clean up beforehand to make all of this go easier…

… ohhh… maybe after one more cut.

Balls!
Balls! ... made of cherry, flattened on the tops, drilled, and dowels glued into them.
Holes drilled for the "feet" of the box.
Holes drilled for the "feet" of the box.
Feet Attached
Feet Attached - Outdoor quality wood glue on each dowel, pushed into snug holes in the bottom of the box.
Box, Standing
Box, Standing, feet attached
Clamps
Clamps - not the best for the job. I have lots of ones perfect for ths task... which I am sure I will find when I clean the basement.
Stained - top view
Stained - top view - a mixture of red cherry and deep mahogany
Stained-bottom view
Stained-bottom view
Varnished
Varnished - partially... many more steps to go.

A thin coat of poly completes the night’s work. Tomorrow I’ll sand this down with fine paper, varnish it again, wait another day, sand it down with steel wool, varnish again, wait another day, sand with steel wool again, wax, buff, wax, buff, wax, and buff… until the box is looking very nice.

During that time, I’ll also be working on the painting to go int this box, 3 other painting commissions, shipping, and kickstarter rewards… the good thing about all these projects, is that they each have steps that involve waiting for things to dry or to set… the trick is managing that time so there is always something to do on the next while waiting on the other.