Posted on

Infernal Teardown and Commissions Available Again

Infernal Device at Night
The Infernal Device at night time

So, this last week we wrapped up the Infernal Device show at the Gerald R Ford Museum in Grand Rapids, Michigan.

Tear-down went pretty smoothly, considering that we had to break down nearly two tons of complicated mechanical machinery in less than two days. From standing atop our 17-foot tall wind and solar power sculpture and rotating mural to disassemble Todd’s wind collector, to getting the solar panels and reserve batteries loaded up, to breaking down the 7-foot tall, 7-foot in diameter, 7-sided rotating mural, to breaking down the massive surrounding structure – and all of its pistons and gears and chains, to scooping up nearly 3 cubic yards of decorative stone – all went fairly well – much thanks to help such as Glen Swanson, and Steampig artists/team members: Alicia Vanheulen and Thomas Birks.

There was a *lot* to talk and blog about during this huge 6 month project, and I missed out on that from being too busy each and every day of it – but if you would like a recap, progress pics, and more pictures of the device itself, you can find them all at http://facebook.com/infernaldevice

The project, is not over. We are re-grouping. We’ve all spent a lot of the last six months, and a lot of expense on making  this project happen, and now comes the time when we recover, rest up, catch up on all those other things that have been screaming to be done these last few months… things like blog updates, new art, and standing obligations.

I’ve spent 6 months without posting new artwork, without making sales, without shipping most of the few sales I had made, and needing to catch up on the last rewards shipments from our kickstarter – and I’ve found myself in a spot where I *need* to sell things, but cannot afford to sell things if I have to pay to have them made or shipped to me. My at-home stock is all but depleted, and I have nothing on hand but a lot of paint and wood to paint on.

I have seven new paintings from the device itself, each 3 foot by 7 foot monsters making one continuous repeating 21-foot by 7-foot mural… but not the money to have them imaged.. as well as doubts as to whether I can sell 3 foot by 7 foot prints at the price I would need to sell them at.

So, I’ve put a few commissions for sale – to get me back into the swing on doing artwork, to get some new artwork on this site, and I figure since they are such favorites: I might as well add some new pieces to the “Airships and Tentacles” art collection since I have yet to get it published.

If you are interested in getting an artwork commissioned, and incredibly cheaply – there are several options available – a 24×24 inch painting (already added), an 18×12 inch painting (already added), and more engravings (I’ll have that offer up soon if it is not up already).

You can find all of those offers here: https://mykeamend.com/products-page/?ptag=commission

Posted on 1 Comment

The End of the Series

Think of a visual representation of a statements or concept, as a series or a single image.

Consider a style or media that would be striking, and imagine it taken to a level beyond your ability.

Research said media if it is new, and think on the concept or image for a while – but not so long that something new takes its place – because the longer this thought process, the more ambitious it should become.

Once the thought of even trying begins to fill you with an equal level of dread and excitement, begin.. even if it is after your bed time.

Don’t stop until it is looking as good you had hoped, because this is the *true* starting point. Now work to take it even further, as far as the piece demands, beyond whatever level of ability you  thought you were limited by.

Walk away regularly with the image in your head, process it, think of the parts you like, the things you don’t, and things you would like to add.

Remove and go over anything you have doubts about without mercy.

Add in only what won’t crowd the piece

When you reach the point where any change will only make it “different”, but not “better”, you are done.

“Sometimes I’ve believed as many as six impossible things by breakfast”, is a good phrase to remember.

Most *Everyone* draws at some point in their life. Those who are intrigued by failure, inspired by the seemingly impossible, continue beyond the point of jagged teeth and crayoned stick fingers.

An artist should never seek to do what they already know they *can* do – and perhaps such is the evil in commissions, which are most often specified according to past works, and limited by scope. Not that all commissions are bad – an artist must accept only those that allow the artist a fair share of creative freedom, as well as room, opportunity, or even obligation to try something new.

An artist who finds himself or herself with extra money, tends to spend it exploring a new mode of art, a new mode of printing, or trying to break into some bigger and more time-involved media or project. It isn’t that we are without wisdom, we know what is wise, and choose to ignore it out of a strong and passionate love for art. Buy canvas, sell paintings, buy scanner, sell reproductions, buy printer, sell giclees, buy lithography press, sell lithographs, buy bigger canvas and better paints, sell paintings, fret over a choice between crowns or a big chunk of marble, sell sculpture, buy clove oil … some ramen noodles …and a better chisel.

When I first started the “Airships and Tentacles” series, in wow… 2006… I don’t even think that “Air Kraken” was a word yet, though I could very well be wrong. I can’t remember specifically, but given Final Fantasy’s tendency to make *some* version of every base creature for each and every environment, it would be insane if they never had some sort of airborne cephalopod in all those years.

Yes, It is foolish of anyone to believe they invented anything… logs and stones rolled down hills long before the wheel, and there is sure to be a comic book from the 60s or illustration from the 1800s with flying cephalopods *somewhere* – and a hundred movies and books in-between. I am only saying I hadn’t yet seen them in paintings, especially luminist and/or American arts-movement-styled paintings, and I thought it would be fun to add hints of in the first painting – and loved that touch enough to continue it through the series.

The Rescue -Steampunk Airship painting featuring Abney Park's HMS Ophelia

My airships, started with a commission for Robert of Abney Park, based on the existing designs by Eliza Gauger, which may or may not have been based somewhat on an equal interest in things such as Final Fantasy. The fun of imagination, came more in execution and styling, and moreso in the landscapes themselves. Over time, as the result of much research on bag sizes, gas content, altitude, temperature, etc… balloon sizes grew, ship sizes and engines shrank – I also started to lean more towards the stylings of DaVinci for wings and other parts – and mixed a bit of the aesthetic stylings from my favorites like Derek Riggs, Michael Whelan, Brom, Bethalynne Bajema, Gustave Dore, Pieter Breughel (E&Y), Zdzislaw Beksinski, and others wherever characters, creatures, scenery, or technology allowed.

Anyway, I wanted to do a series of what is essentially landscape art, explored by this fascinating mode of travel – as a means of adding a human element for the viewer to view through, without focusing on figures so much as to make it “character art”.

I sought to combine Lovecraftian elements and mythos with Vernian machines and aptly romanticized visions of exploration; in this, I also wanted to hide every bit of my usual dark and spooky art in such a way that it goes mostly to completely unnoticed.

The latter is most likely why this series was the first series I ever did that people *both* liked, *and* would hang on their walls (Criteria: Does not scare children, much; Does not creep in-laws and future in-laws out; Does not give the potential future girlfriend reason for pause; Does not get a cubicle-dweller fired).

Shadow, Mist and Stone: The last of the series
Shadow, Mist and Stone: The last of the series (crop)
Shadow, Mist and Stone: The last of the series
Shadow, Mist and Stone: crop 2
Shadow, Mist and Stone: full view
Shadow, Mist and Stone: full view. This, the last of these images is finally available as a giclee on fine art paper, a giclee on canvas, and a metallic print at our Etsy store: http://ettadiem.etsy.com

I *thought* I was going to explore this into many, many other types of media – and planned to have a sculpture in wood and a sculpture in metal in the series of nothing else. But, I’ve done more paintings in this series than I intended to, and many, many engravings. The very last painting ships out tomorrow… technically that is not true, because there will be *some* of that in the Infernal device – but I am counting that as my sculpture piece to complete the series.

I’ve got one hell of a collection together in this – plenty enough for the book I committed myself to making works for. I’ll be releasing it in a time when dirigibles and flying Cephalopods have over these years become an odd sort of ‘norm’ (a subcultural standard that to most, comes out of *nowhere* for no apparent reason). The journey has been in interesting one, and I feel that alone merits the book’s release if nothing else… pending until all this Infernal Device stuff is under control.

Thank you everyone who supported the making of this series by buying prints, sharing links and such – and of course thank you  everyone who continues to do so.

I really have no idea what I am going to do from here, because I have *many* ideas and will have to choose one, or combine a few – but whatever I am thinking, I am sure going to look forward to it the moment I allow myself to look forward to other things.

Right now I am looking forward to getting the first build of the Infernal Device done, and looking to make it better than anything I could ever possibly do.

In celebration of the closing of the series (okay… I really need money to get my butt to Maker Faire Detroit), I am making large giclees of the very first image from this series available online. They are 30 inches by 24 (printed area is slightly less), and they are printed on fine art rag paper. I will also sign and date these. These are not limited editions – the reason is that the metallics and canvas prints I sold as limited editions, must always remain more special than any version I put out afterward. These are prints I make available in small quantities at conventions, with no set number to be made – but they beautiful, high quality, and they are the biggest prints of this  image you can get without buying one of the 4 remaining giclees on canvas.

If you would like one, these few prints are available HERE – and are only $100 until they  are gone.

Posted on

New Tee shirt design

Well, actually it is an improvement and upgrade on the previously proposed tee shirt design. Now that we’re ready to go to production on these, I started off doing some graphical cleanup and decided it would be cooler if the shirts were two sided and had fancier text on them.

I’m catching up from the kickstarter – having sent out files and orders for all elated prints, the coloring books, the downloads and other rewards we offered – the limited edition tee shirts for the kickstarter were needing some rework before final printing, so I decided to go ahead and rework these as well – so I could order all of them at the same time.

If you have already ordered shirts, you might notice that the new price is a dollar more – don’t worry, you’ll be getting your shirts for the price you paid.

All shorts ordered up to now, or ordered now, should be ready to ship on or around the 15th of June. So, if you are reading this after then, they are already to ship.

These will be sold until this batch of 50 or so shirts sells out, and then we’ll be introducing a one-sided design using the device as the large image on the front.

PURCHASE:
purchase link: http://infernaldevice.net/Artprize/store/fundraising/infernal-tee/

back:

front:

front (closeup):

back (closeup):

Posted on

For Lovers of Rare Books

I made this book a while back, out of hardwood, and spent a lot of time sanding, carving, and polishing it. I also put a lot of love into making the securing system – two fat-ended brass pins to give me lots of room to fill it.

If someone grabs it, through our Kickstarter:

– I will fill it with every print from the Airships and Tentacles series
– each printed on a fine rough-edged rag paper
– each page annotated as the coffee table book would be, but in my own handwriting
– each page signed discreetly and numbered “1 of 1”
– each of these prints will be an entirely unique size from any editions made
– The front page will have “to [Your Name]” and my signature.
– To make it even more rare, I will make one unique work or original art to complete the piece. Yes, one page will be an original work of art to complete the series.

The Book size is roughly 13 inches by 15 inches, and will be a hefty and beautiful tome for your tabletop or shelf. You can also remove each print if you wish, to hang them, and secure the book cover away someplace safe.

It isn’t cheap… It’ll cost me about 20 bucks to print each imaged page  – which means you’re getting this at no actual profit…maybe even a loss – but I am hoping that this sale would push us over that tipping edge of 50% funding. And I’ll do anything to ensure the success of our project… including this.

Yes, it will be well worth it if it sells – so don’t feel bad about grabbing this great offer and helping us to make something even bigger.

So, if you would like to have this book, it is available for a donation of $1350, as are many other great things, at our Kickstarter: HERE

ALSO:

$20 through our kickstarter gets you a signed and personalized print of any of the below (you’ll need to go to my gallery page to get full views… it was hell just putting this compilation of thumbnails together):

Posted on

Cooties and a story by G.D. Falksen!

Well, it looks like I am devoting myself this year to finally finishing up my children’s book – but for now, I am working really hard at making our kickstarter successful.

We are beyond dedicated to making this happen… so much so that I stayed up all day and night putting this special drawing together (image below), which will be available in printable PDF format exclusively to everyone who donates $1 or more though our Kickstarter.

A $2 purchase of a good piece of fine art paper from your local craft store, plus this download, and you’ll have this silly piece of my steampunk storybook for your wall… $3 total investment, and no shipping.

We’ve also received an unpublished text by G.D. Falksen to add to our kickstarter offers: An Original Never-before Published Exclusive Short Story by award winning author G.D Falksen; You get a hard copy of the short story in a binder, decorated with exclusive print by Myke Amend (an illustration of the story within) – each illustrated cover HAND EMBELLISHED, numbered, and signed… making for a *very unique* work of literature and art combined.

Other offers include everything from exclusive prints from me, the Airships and Tentacles Coloring Book, the Airships and Tentacles Scrapbooking kit, Original Paintings, and other incredible offers as *much* less than regular price…

We’ve had some good fortune this week, blogged by Warren Ellis, tweeted by Neil Gaiman and Kyle Cassidy, you may have seen us mentioned by Vernian Process, Abney Park, Nancy Overbury, and other greats… who we will be sure to mention more in depth when we compile our big list of People Last Against the Wall…

Please help us to keep this momentum going. 7 days remain, and we are nearly 30% there. Your donation of $1, retweeting, reblogging, or otherwise spreading the word of this project can put us over that hill.

Cooties - Available only through our kickstarter
Cooties - Available only through our kickstarter (click to enlarge)
Posted on 2 Comments

Airships and Tentacles Coloring Book

In thinking of something really good, but inexpensive that I could put together as an added incentive to be a part of our kickstarter, and in staying up all night making a new engraving – it came to me…

This coloring book.

When I was a kid, Advanced Dungeons and Dragon’s Monster manual, and their Dieties and Demigods, had some rather awesome illustrations in them: All black and white. I loved those illustrations, but I loved them even more when I caught a Glimpse of my friend Brian’s book… which he had taken colored pencils to for each and every illustration. I thought it pretty amazing how with some simple color over the black and white of the pages, those illustrations really came to life. They were simple to color, because the shading was already there – which made for a basic coloring level, with lots of room for improvisation, and advanced looking results.

I thought to myself this AM, “Hey… all these engravings I’ve been doing would be perfect for this”,and so I set to gathering up pages for a coloring book… and with all the engraving that I do, I have a *lot* of them.

Here are the images that will be in this coloring book… which will for the time being, only be available through our kickstarter for an $11 donation (which includes Shipping and Handling). The coloring book is over 30 pages, and ready to color.

You’ll notice that some of the images below are colored, because I copied really quick from my gallery. These images will be uncolored in the coloring book version (see above).

If you would like to see a PDF of the actual book, CLICK HERE

If you would like to buy a copy of the book for $12, CLICK HERE

Posted on

Hello!

I am talking to you… through the internet!

I forgot to mention the rewards such as limited etchings on brass, paintings, and the like – but, if you’d like to know more, we’ve got a writeup about the project here:

http://www.kickstarter.com/projects/infernaldevice/the-infernal-device-an-enormous-mechanical-and-pai

Posted on

My first Video ever: It’s terrible! You’re welcome!

Because we needed video up for The Infernal Device‘s kickstarter page, and didn’t have one, I decided to do a workshop video to talk about progress on the model. Problem being that I did not have any camera person to move the camera to key points like… I don’t know… my head, the model, the table of gears.

Still, I am proud of it – if not simply because I managed to not wear a helmet with blue spandex, nor am I waving a frisbee about.

If you would like to know just what the hell I am going on about in this video, you can see images of the parts we’ll be using, the part of the model already built, progress pics of building this drum, pictures of us and our works, and actual things about the Device and why we’re building it, details about our ArtPrize bid, all at InfernalDevice.net.

Posted on

Approved!

Our Kickstarter was approved and launched yesterday, and you can find it here: Our KickStarter Page

If you aren’t familiar with Kickstarter, it is a perfect addition to our community project feel, in that it allows fellow art lovers to become a part of our project, while receiving rewards for their participation.

Gifts offered for donations starting as low as $1 begin at our sincere thanks, and go as high as being painted into the artwork itself – with many, many levels in between at $5, $10, etc…

If you do not have a dollar to pitch in at the moment, we completely understand, and would appreciate your help in simply forwarding on the link to others. All those little donations matter greatly, especially when friends and friends of friends are chipping in.

On a sidenote: If you would like to hep out in other ways, from donating junk from your garage, to being there for the hands-on work such as the build, we’d love to hear from you. You can reach us through our contact form, linked at the top of this page.

Posted on

Work with me here

I am seeking two people who live in Grand Rapids, or are willing to travel to Grand Rapids for the Artprize competition/event.

Most importantly, those people would be able to be here during Artprize, Late September through early October, or at least be able to transport their part of the project before the event begins. Preferably, they would live in the region and be able to work on the project right here – that work period being from May through September.

This would be a collaborative project, with winnings split evenly between collaborators, should we win. Expenses would be covered by whatever sponsors we can find, and I’ll be seeking space to work in, in addition to the perfect venue for our work – hopefully one that will yield the most visitors.

The types of artists/artisans I need are as follows:

A plumber, or preferably someone who has experience and tools to weld brass, and feels they can do so imaginatively. Bonus points if you have some experience with functional structure and moving parts.

An Architectural design/engineering student (or preferably certified structural engineer), because venues and insurers are very happy when there is paperwork ensuring them our work won’t fall down and go “Boom! Squish! Aaaagh!”

Someone who works with electronics and electrical might also be nice to have, as we probably won’t be able to use coal power our device.

A co-painter might also be desired… preferably one who works in the pop-surrealism vein and does not mind putting down paint with other people’s paint.

Someone who works in alternative energy would be a plus. Electrical is the fall-back, but I would *like* to see this thing powered by green or alternative energy sources – anything from solar power, to sterling engines, to just a bio-diesel powered generator… or otherwise.

Persons experienced in grant writing and/or press releases. I’d be happy to count you as a collaborator as well – as long as you are willing to pitch in on driving, organizing, and/or some physical work in the process.

Of course the fewer people we have, the bigger the share, so people skilled in multiple areas outline above would be preferable – but I feel our team should not be so slim that it presents difficulty. That perfect balance is what I am looking for.

Creative Freedom:

I’ll put in ideas, thoughts, and designs where/if *wanted*, but want you to have as much creative freedom as you desire. I want this to be a collaborative project, not an artist as an overseer project. You can put in equal input on what I am bringing to the table, wood working, painting, promotional ability, web site skills, programming skills, graphic design skills, and a broad knowledge of most everything practical, to make a huge and impressive piece that is *ours* collectively and equally.

What is to gain?

Aside from participating in the nations largest open-entry art competition, which spans an entire downtown area:

$250,000 is the first prize,  $10,000 is the second prize, $50,000 is the third, and fourth through tenth prize are $7,000.

I am confident that if we do not win, we should be able to find a home for the finished work pretty easily, because we are that awesome. Interested parties can contact me through my contact form (hit the little envelope on the pipe at the top of the page).

Sponsors needed:

Right now, I would love to hear from suppliers of fabric and canvas, art paper, lumber, brass tubing/piping/hardware, tool companies, transportation/logistics companies, hobby shops (gears, cogs, shafts, servos), salvage yards (much of the same), art supply companies (paint, gesso, acrylic medium, pencils, markers, brushes, etc..), and anyone who has a hangar, industrial space, or large garage for us to build in.

Progress to date:

I’ve already grabbed a domain and hosting for the project, in trying to be more pro-active than last year. I will be using my “spare* time to build the site for this project over the next month or so. Details will be on that will be posted here once the site is up. Everything from there will be rather “hush hush” and done via groups, phone, email, or in-person, aside from press releases, until the ArtPrize bidding process begins.